Beryllium sulfide
Chemical compound
Identifiers | |
---|---|
CAS Number |
|
3D model (JSmol) |
|
ChemSpider |
|
ECHA InfoCard | 100.033.680 |
EC Number |
|
PubChem CID |
|
CompTox Dashboard (EPA) |
|
InChI
| |
| |
Properties | |
Chemical formula | BeS |
Molar mass | 41.077 g/mol |
Appearance | white crystalline |
Density | 2.36 g/cm3 |
Melting point | 1,800 °C (3,270 °F; 2,070 K) decomposes |
Solubility in water | Decomposes |
Band gap | 7.4 eV |
Refractive index (nD) | 1.741 |
Structure | |
Crystal structure | cubic |
Space group | F43m[1] |
Thermochemistry | |
Heat capacity (C) | 34 J/mol K |
Std molar entropy (S⦵298) | 34 J/mol K |
Std enthalpy of formation (ΔfH⦵298) | -235 kJ/mol |
Hazards | |
NIOSH (US health exposure limits): | |
PEL (Permissible) | TWA 0.002 mg/m3 C 0.005 mg/m3 (30 minutes), with a maximum peak of 0.025 mg/m3 (as Be)[2] |
REL (Recommended) | Ca C 0.0005 mg/m3 (as Be)[2] |
IDLH (Immediate danger) | Ca [4 mg/m3 (as Be)][2] |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). Infobox references |
Chemical compound
Beryllium sulfide (BeS) is an ionic compound from the sulfide group with the formula BeS. It is a white solid with a sphalerite structure that is decomposed by water and acids.[3]
Preparation
Beryllium sulfide powders can be prepared by the reaction of sulfur and beryllium in a hydrogen atmosphere by heating the mixture for 10-20 minutes at temperatures from 1000-1300 °C. If done at 900 °C, there is beryllium metal impurities.[4]
Alternatively, it can be prepared by the reaction of beryllium chloride and hydrogen sulfide at 900 °C.[3][4]
References
- ^ Eugene Staritzky (1956). "Crystallographic Data. 121. Beryllium Sulfide, BeS". Analytical Chemistry. 28 (5): 915. doi:10.1021/ac60113a045.
- ^ a b c NIOSH Pocket Guide to Chemical Hazards. "#0054". National Institute for Occupational Safety and Health (NIOSH).
- ^ a b Kenneth A. Walsh (2009). Beryllium Chemistry and Processing. ASM International. p. 127. ISBN 978-087170721-5.
- ^ a b William Zachariasen (1926). "Die Kristallstrunkturen von Berylliumoxyd und Berylliumsulfid" [The crystal structures of beryllium oxide and beryllium sulfide]. Zeitschrift für Physikalische Chemie (in German). 119U (1): 201–213. doi:10.1515/zpch-1926-11921. S2CID 99383696.
- v
- t
- e