Swelling capacity
Amount of a liquid that can be absorbed by a polymer
The swelling capacity of a polymer is the amount of a liquid that can be absorbed by it. This test can done by two methods:
- Beaker test method[1]
- Tea bag test method[2]
Beaker test method
In this method
- A small amount of superabsorbent polymer material is taken (0.1g) and it is placed in the beaker.
- 100 ml of deionized water is poured into the beaker.
- After 20 min the swollen polymer was separated by using [filter paper]
- By weighing the polymer, one can find the swollen capacity of the SAP material.[3]
Tea bag test method
- In this method, 0.1 g of SAP material is placed into a permeable bag, which is suspended over excess water in a beaker.
- Wait 20 min. and weigh the bag and then calculate the percentage of swelling through the following formula:
- (w2-w1)/(w1) %
- w1= weight of the polymer (Before swelling)
- w2= weight of the polymer (After swelling)
- Note: Filter paper only for removing water.
References
- ^ Anandan, Dhivyaa; Madhumathi, G.; Nambiraj, N. Arunai; Jaiswal, Amit K. (June 15, 2019). "Gum based 3D composite scaffolds for bone tissue engineering applications". Carbohydrate Polymers. 214: 62–70. doi:10.1016/j.carbpol.2019.03.020. ISSN 0144-8617. PMID 30926008. S2CID 88481556.
- ^ Zhong, Peihua; Wang, Jun; Wang, Xiaoxian; Liu, Jiaping; Li, Zhen; Zhou, Yichuan (2020). "Comparison of Different Approaches for Testing Sorption by a Superabsorbent Polymer to Be Used in Cement-Based Materials". Materials. 13 (21): 5015. Bibcode:2020Mate...13.5015Z. doi:10.3390/ma13215015. ISSN 1996-1944. PMC 7664450. PMID 33172166.
- ^ Yang, Zijiang; Arakawa, Hisayuki (2023). "A beaker method for determination of microplastic concentration by micro-Raman spectroscopy". Methodsx. 11. doi:10.1016/j.mex.2023.102251. PMC 10336159. PMID 37448948.
- v
- t
- e